£179.99
Was £199.99
Save £20.00
  • Copper Effect 
  • No Tools Required 
  • Contemporary Design 

This cylinder water feature has a coppered effect and would add a contemporary feel in a garden setting. 

It does not require any tools to set up, it is easy to install and can be enjoyed day and night. 

The ZEN Range water features are man made and polymer resin based, and give an authentic copper, stone, pot or granite appearance. They are frost and weatherproof so will not fade over time.

Full description

Description

The ZEN Range water features are man made and polymer resin based, and give an authentic copper, stone, pot or granite appearance. They are frost and weatherproof so will not fade over time.

Each box contains the water feature, integrated led light feature, a four or five way water proof cable link, water pump and transformer. They have the benefit of a 10 metre long cable, which should be sufficient for most garden connections to mains.

Installation instructions

  • Select a suitable area within your garden and place the water feature. 
  • Connect the water pump to the 15mm plastic hose
  • Connect the wiring of the water pump to the 4 or 5 way wiring loom
  • Please note, the wiring loom is fully waterproof and attention should be made to the correct tightening of the couplings
  • Connect the remaining leads from the led lights into the wiring loom 
  • Fill the water feature with water, please note the water is continually pumped through the feature when powered up. You may occasionally have to top up the level of water. If you can hear the pump turning, this indicates that the water level is too low.
  • Finally, connect the transformer to the wiring loom

Specification

Product Type
Water Feature
Product Dimensions
H: 70cm W: 50cm D: 50cm
Accessories
Water Feature
Material
Poly-Resin, Weathered Copper Effect